Sometimes referred to as Zamac Nail in Anchors , they are made from corrosion resistant ZAMAC alloy and can be used in concrete, block, brick or stone. They are quickly and easily hammered into pre-drilled holes.The nail acts as an expansion and locking pin,and they're virtually tamper-proof. The integral unit is made of zinc alloy with hardened steel nail, which is zinc plated per ASTM B633, SC1, Type III. Hammer Drive Anchors ar also available with Stainless Nails.
Click on an item # for more detailed information.
Item # |
Item Name |
Material |
Grip Range |
Hole Size |
Anchor Diameter and Length |
|---|---|---|---|---|---|
| NFC4101 | N/A 3/16" x 7/8" Zinc Hammer Drives | N/A Zamak Alloy | N/A 0-1/8" | N/A 3/16" | N/A 3/16" x 7/8" |
| NFC4100 | N/A 1/4" x 3/4" Zinc Hammer Drive | N/A Zamak Alloy | N/A 0-1/8" | N/A 1/4" | N/A 1/4" x 3/4" |
| NFC4102 | N/A 1/4" x 1" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1/8-1/4" | N/A 1/4" | N/A 1/4" x 1" |
| NFC4103 | N/A 1/4" x 1 1/4" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1/4-1/2" | N/A 1/4" | N/A 1/4" x 1 1/4" |
| NFC4104 | N/A 1/4" x 1 1/2" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1/2-3/4" | N/A 1/4" | N/A 1/4" x 1 1/2" |
| NFC4105 | N/A 1/4" x 2" Zinc Hammer Drives | N/A Zamak Alloy | N/A 3/4" - 1 1/4" | N/A 1/4" | N/A 1/4" x 2" |
| NFC4106 | N/A 1/4" x 2-1/2" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1" - 1-1/2" | N/A | N/A 1/4" x 2-1/2" |
| NFC4107 | N/A 1/4" x 3" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1-1/4" - 2" | N/A | N/A 1/4" x 3" |
| NFC4108 | N/A 1/4" x 4" Zinc Hammer Drives | N/A Zamak Alloy | N/A 1 1/2" - 3" | N/A 1/4" | N/A 1/4" x 4" |
