Catalog

Sometimes referred to as Zamac Nail in Anchors , they are made from corrosion resistant ZAMAC alloy and can be used in concrete, block, brick or stone. They are quickly and easily hammered into pre-drilled holes.The nail acts as an expansion and locking pin,and they're virtually tamper-proof. The integral unit is made of zinc alloy with hardened steel nail, which is zinc plated per ASTM B633, SC1, Type III. Hammer Drive Anchors ar also available with Stainless Nails.

Click on an item # for more detailed information.

Request Information
Unit of Measure
Items
NFC4101

3/16" x 7/8" Zinc Hammer Drives
NFC4100

1/4" x 3/4" Zinc Hammer Drive
NFC4102

1/4" x 1" Zinc Hammer Drives
NFC4103

1/4" x 1 1/4" Zinc Hammer Drives
NFC4104

1/4" x 1 1/2" Zinc Hammer Drives
Material N/A Zamak Alloy
Available Materials N/A Zamak Alloy
Weight (lbs.) per 100 N/A 1.0 N/A 1.25 N/A 1.75 N/A 2.25 N/A 2.5
Grip Range N/A 0-1/8" N/A 0-1/8" N/A 1/8-1/4" N/A 1/4-1/2" N/A 1/2-3/4"
Master Carton Quantity N/A 1000
Hole Size N/A 3/16" N/A 1/4" N/A 1/4" N/A 1/4" N/A 1/4"
Anchor Diameter and Length N/A 3/16" x 7/8" N/A 1/4" x 3/4" N/A 1/4" x 1" N/A 1/4" x 1 1/4" N/A 1/4" x 1 1/2"